High-quality PC alloy material, the service life is more than 20 years.
Waterproof grade can reach IP65
size: 340*265*126 mm
Maximum Capacity: 24 cores (24 SC single port) can hold 24 LC duplex adapters which use as 48 core, without SC duplex port
The joint box can use the common indoor fiber optic cable and drop cable.
FTTH Optical Fiber Distribution Box is the network client wiring devices, mainly used for optical transmission terminal splicing, splitting, wiring output and so on, which can effectively be terminated the fiber optic cable, protection and management of optical network transmission equipment .
2.1 This products are made flame retardant ABS and polycarbonate materials mixied oafter high temperature. It called as plastics alloy. The product shape and line is smooth, strong impact, protection up to IP55 level.
2,2 This product is a multi-purpose wiring devices, bothcan used as the optical splitter box and the optical splitter box , easy to operate and flexible.
2.3 It designe to a unique anti-theft lock , box opening and closing is flexible, protective performance is good.
2.4 It uses a unique hinge structure, the cover can easily be removed and installed when construction to take advantage of the work on splicing and distribution .
2.5 It using the inverted plate structure, can configure the ports and high-density spectral facilities.
3.1 splitter box to use: When not working as the spectrophotometric method, using 12pcs SC adapter as the use of the input and output cables on each side plugs into 12pcs SC optical path connecting boxes to complete assigned work.
The installation and use
4.1 Installation: Open the box, remove the cover, remove three sets of inflate the plastic nail from the accessory bag,make holes in the specified location on the wall, put into the three bolt from the bottom front of the box and screw them.
4.2 laying fiber optic cable:
a Splicing the pigtail and outdoor cable after stripping outdoor cable about 50mm;
b after the splicing placed the protection sleeve in the back of the slot ;
c the outdoor cable steel core wire fixed on the strengthen core fixed position of the box of the bottom,lock the waterproof head;
d Place the adapter into the sub-middle position on the adapter card after outdoor cable and pigtail splicing, the plug clip into the adapter inside;
e User drop cable connect with fast connectors, pull out the drop cable black head,plug the drop cable into the cable, make some drop cable winding on the splicing positon of the bottom of the box, and then install the fast connectors.
f Use with fiber optic cable plugs into the the no using hole to prevent dust entering.
1, Operating Temperature: -40 ° ~ +60 ° C;
2, Relative humidity: 93% (at +40 ° C);
3, Atmospheric pressure: 62kpa ~ 101kpa (approximate altitude of 0 to 5,000 m)
4, The insertion loss: ≤ 0.35dB;
5, Return loss: ≥ 50dB;
6, Plug durability:> 1000 times
7, Insulation resistance: ≥ 1000MΩ/500v (DC)
8, Pressure:> 3000v (DC) / 1min no breakdown, no flashover. ABS + PC material